- Home Audio
- Sound Bars
- Car & Marine
Power and Style that Amplifies
The PA 330.2 is a two-channel class A/B amplifier with built-in fully variable high-pass and low-pass crossover capable of producing 75 Watts x 2 RMS continuous power @ 4 ohm. It's also capable of bridged one-channel operation with a maximum power of 300 Watts into 4 ohms.
- Speaker level input connects 2 ohm stable stereo operation is capable of driving virtually all automotive speakers.
- High-speed MOSFET switching power supply and high current bipolar output transistors pump maximum voltage and high current to your speakers or subwoofers.
- Double layer fiberglass epoxy printed circuit boards for more rigidity, less shrinkage and a smaller overall amp footprint.
- 6-way Smart System Protection (SSP) circuits
- Selectable 12 dB/octave high or low-pass crossover with fixed crossover frequency.
- Switchable 3-position bass boost (0dB, 6dB, 12dB) for extra bass thump.
- Variable input gain optimizes match with different signal sources (175mv to 8V).
- RCA outputs for easy daisy chaining of other amplifiers.
- Mounting hardware with rubber isolation grommets and extra fuse included.
- Multi-color status LED gives instant information on amplifier operation.
|Amplifier Power Specs Dynamic Power at 14.4V Watts per channel bridged - 4 ohms||300 watts|
|Amplifier Power Specs Dynamic Power at 14.4V Watts per channel NOT bridged @ 1 kHz - 2 ohms||200 watts|
|Amplifier Power Specs Dynamic Power at 14.4V Watts per channel NOT bridged @ 1 kHz - 4 ohms||150 watts|
|Amplifier Power Specs RMS Power at 14.4V Watts per channel bridged - 4 ohms||200 watts|
|Amplifier Power Specs RMS Power at 14.4V Watts per channel NOT bridged @ 1 kHz - 2 ohms||100 watts|
|Amplifier Power Specs RMS Power at 14.4V Watts per channel NOT bridged @ 1 kHz - 4 ohms||75 watts|
|Amplifier Specs - 12V & Ground Cable Gauge||4AWG|
|Amplifier Specs - Bass Boost Characteristics||3-position(0,6,12dB) Hz|
|Amplifier Specs - Channel Notes||Bridgeable Class AB MOSFET|
|Amplifier Specs - Channels||2|
|Amplifier Specs - Total Dynamic Power||300 watts|
|Dimensions - Product Weight (each)||4.70 pounds|
|Dimensions With Panels - Depth||8 1/8 (20.64cm) "|
|Dimensions With Panels - Height||1 15/16 (4.92cm) "|
|Dimensions With Panels - Width||7 3/4 (19.68cm) "|
|Electrical - CEA2006 Rating||200 watts / 4 ohms|
|Electrical - Effective Damping Factor||>100|
|Electrical - Input Impedance||15 k ohms|
|Electrical - Max Sensitivity||175mV - 8 dB|
|Electrical - Minimum Impedance Bridged||4 ohms|
|Electrical - Minimum Impedance Not Bridged||2 ohms|
|Electrical - Protection Circuitry||25 Amp ATC fuse, reverse polarity, thermal and DC offset|
|Electrical - Remote Gain||no|
|Electrical - Signal-to-noise (Referenced to rated power)||80 dBA|
|Electrical - Total Frequency Response||10Hz-30kHz|
|Electrical High Pass Filter - Filter Slope||12dB/oct|
|Electrical Low Pass Filter - Filter Slope||12dB/oct|
|Shipping - Total Shipping Weight||6.70 pounds|